Effect of oxygen on regulation of properties of moderately boron-doped diamond films

Regulation of oxygen on properties of moderately boron-doped diamond films is fully investigated. Results show that, with adding a small amount of oxygen (oxygen-to-carbon ratio < 5.0%), the crystal quality of diamond is improved, and a suppression effect of residual nitrogen is observed. With increasing ratio of O/C from 2.5% to 20.0%, the hole concentration is firstly increased then reduced. This change of hole concentration is also explained. Moreover, the results of Hall effect measurement with temperatures from 300 K to 825 K show that, with adding a small amount of oxygen, boron and oxygen complex structures (especially B₃O and B₄O) are formed and exhibit as shallow donor in diamond, which results in increase of donor concentration. With further increase of ratio of O/C, the inhibitory behaviors of oxygen on boron leads to decrease of acceptor concentration (the optical emission spectroscopy has shown that it is decreased with ratio of O/C more than 10.0%). This work demonstrates that oxygen-doping induced increasement of the crystalline and surface quality could be restored by the co-doping with oxygen. The technique could achieve boron-doped diamond films with both high quality and acceptable hole concentration, which is applicable to electronic level of usage.     

Two-dimensional topological semimetals

The field of two-dimensional topological semimetals, which emerged at the intersection of two-dimensional materials and topological materials, has been rapidly developing in recent years. In this article, we briefly review the progress in this field. Our focus is on the basic concepts and notions, in order to convey a coherent overview of the field. Some material examples are discussed to illustrate the concepts. We discuss the outstanding problems in the field that need to be addressed in future research.     

Linearization of Poisson groupoids

Motivated by a search for Lie group structures on groups of Poisson diffeomorphisms, we investigate linearizability of Poisson structures of Poisson groupoids around the unit section. After extending the Lagrangian neighbourhood theorem to the setting of cosymplectic Lie algebroids, we establish that dual integrations of triangular bialgebroids are always linearizable. Additionally, we show that the (non-dual) integration of a triangular Lie bialgebroid is linearizable whenever the $r$-matrix is of so-called cosymplectic type. The proof relies on the integration of a triangular Lie bialgebroid to a symplectic LA-groupoid, and in the process we define interesting new examples of double Lie algebroids and LA-groupoids. We also show that the product Poisson groupoid can only be linearizable when the Poisson structure on the unit space is regular.     

An efficient edge based data structure for the compressible Reynolds-averaged Navier–Stokes equations on hybrid unstructured meshes

An efficient edge based data structure has been developed in order to implement an unstructured vertex based finite volume algorithm for the Reynolds-averaged Navier–Stokes equations on hybrid meshes. In the present approach, the data structure is tailored to meet the requirements of the vertex based algorithm by considering data access patterns and cache efficiency. The required data are packed and allocated in a way that they are close to each other in the physical memory. Therefore, the proposed data structure increases cache performance and improves computation time. As a result, the explicit flow solver indicates a significant speed up compared to other open-source solvers in terms of CPU time. A fully implicit version has also been implemented based on the PETSc library in order to improve the robustness of the algorithm. The resulting algebraic equations due to the compressible Navier–Stokes and the one equation Spalart–Allmaras turbulence equations are solved in a monolithic manner using the restricted additive Schwarz preconditioner combined with the FGMRES Krylov subspace algorithm. In order to further improve the computational accuracy, the multiscale metric based anisotropic mesh refinement library PyAMG is used for mesh adaptation. The numerical algorithm is validated for the classical benchmark problems such as the transonic turbulent flow around a supercritical RAE2822 airfoil and DLR-F6 wing-body-nacelle-pylon configuration. The efficiency of the data structure is demonstrated by achieving up to an order of magnitude speed up in CPU times.     

Conformational Changes and Redox Properties of Bimetallic Single Helicates of Hexapyrrole-α,ω-dicarbaldehydes

The hexapyrrole-α,ω-dicarbaldehydes 1 a and 1 b were metallated with Cu^II, Ni^II, and Pd^II to give bimetallic complexes where a pair of 3 N+O four-coordinate metal planes are helically distorted and the central 2,2′-bipyrrole subunit adopts a cis or trans conformation. X-ray crystallographic analysis of the bisCu complex revealed a closed form with a cis-2,2′-bipyrrole subunit and an open form with a trans-2,2′-bipyrrole subunit. The bisPd complexes took a closed form both in the solid state and in solution. They are regarded as single helicates of two turns and the energy barrier for the interchange between an M helix and a P helix was remarkably influenced by the bulky 3,3′-substituent of the central 2,2′-bipyrrole subunit. Although the bisNi complexes adopt a closed form in the solid state, they exist as a homohelical open C₂-symmetric form or a heterohelical open C_i-symmetric form in solution. A theoretical study suggested that the closed form of 1 a Pd was stabilized by the Pd–Pd interaction. Compound 1 a Pd was reversibly oxidized by one electron at 0.14 V versus ferrocene/ferrocenium (Fc/Fc⁺) and this oxidized species showed Vis/NIR absorption bands at λ=767 and 1408 nm.     

Critical Assessment of the DFT + U Approach for the Prediction of Vanadium Dioxide Properties

In a previous study (Stahl and Bredow, Chem. Phys. Lett. 2018, 695, 28–33), we have studied structural, energetic, and electronic properties of two vanadium dioxide VO₂ polymorphs with modified global and range-separated hybrid functionals. Since hybrid methods are computationally demanding, we evaluate the computationally more efficient DFT + U method in the present study. We assessed the widely used Dudarev PBE + U approach with a literature value of the effective Hubbard parameter U_eff = 3.4 eV. We compared the PBE + U results for the two VO₂ polymorphs with our previous results, a self-consistent hybrid functional sc-PBE0, and the meta-GGA functional SCAN. It was found that the PBE + U method yields a strongly distorted monoclinic phase and does not reproduce the metal-to-insulator transition of VO₂ correctly, even with modified values of U_eff. On the other hand, sc-PBE0 and SCAN describe the relative stability and the electronic structure of both polymorphs correctly and also provide reasonable lattice parameters. The functional SCAN yields the optimal balance between computational efficiency and accuracy. © 2019 The Authors. Journal of Computational Chemistry published by Wiley Periodicals, Inc.     

Towards Polysulfuric Acids: The Hydrogentrisulfate Anion [HS3O10]− in A[HS3O10] (A=Na,K, Rb)

The reaction of Na₂SO₄ and K₂SO₄ with fuming sulfuric acid (65 % SO₃) yielded colorless extremely sensitive crystals of Na[HS₃O₁₀] (monoclinic; P2₁/n (No. 14); Z=4; a=707.36(2), b=1378.56(4), c=848.10(3) pm; β=94.817(1)°; V=824.09(4) ? 10⁶ pm³) and K[HS₃O₁₀] (orthorhombic; Pccn (No. 56); Z=4; a=1057.16(3), b=807.81(2), c=897.57(2) pm; V=766.51(3) ? 10⁶ pm³). The analogous rubidium compound Rb[HS₃O₁₀] (orthorhombic; Pnma (No. 62); Z=4; a=891.43(3), b=1095.34(4), c=839.37(3) pm; V=819.58(5) ? 10⁶ pm³) originates from the reaction of Rb₂CO₃ and SO₃. All of the different structures contain the hitherto unknown anion [HS₃O₁₀]^? and are stamped by strong hydrogen bonds linking the anions either to dimers or chains. Theoretical investigations by DFT methods give further insight in the structural characteristics of [HS₃O₁₀]^?. The preparation of the [HS₃O₁₀]^? anion can be seen as an important milestone on our way to the still elusive polysulfuric acids.